User manual

11
etting and using the oven programmer/timer S
Setting the time of day and selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash 00.00.
Before you can select a cooking function or set a temperature
you must put the app
,
liance into manual operation mode and
et h
o e duration and
o s buttons to adjust the time that appears
o
play and the manual
(11) will appear instead.
e r
o
Separately set each oven to its
o ctly normal for a smell to be produced during this
o any windows in the room are left
o in the room whilst the
o d leave each oven on maximum setting for 30 – 40
o should not burn off both ovens
simultaneously.
s t e time of day.
To select manual operation mode, press th
cooking end time buttons simultaneously.
Use the plus and minu
in the timer display.
When the time shown in the timer display is correct, release the
plus and minus buttons. After 5 seconds, the Auto function
symbol (9) will disappear from the timer dis
operation symbol
B fo e first use
To remove any residue from the oven cavities that may have
been left from the manufacturing process, you should select the
fan oven function for the main oven and the conventional oven
function for the secondary oven.
maximum temperature setting.
It is perfe
process.
You should make sure that
open during this process.
It is advisable for you not to remain
burning off process is taking place.
You shoul
minutes.
IMPORTANT: You