说明书递交文档 设 计 许婷婷 DESIGN 2012.7.9 校 对 CO.BY 标准化 STANDARD 业务 seller 袁晓娟 图纸名称 PART NAME BAUMATIC B25SE(CE-BCD515WE-S) 说明书 50200101B858 材料 MATERIAL 马凯 李宇 图号/物料编码 PART NO. 图样 版本号 重量 标记 REV.NO (g) REL . WEIGHT 比例 80g双胶纸 scale 批 准 美的冰箱事业部 AUTHORIZ 于清 0 1:1 E MIDEA REFRIGERATION DIVISION 共 页 TOTAL SHEETS 第 页 NO. OF SHEETS 技术要求 1、 尺寸：32K 2、 说明书印刷颜色：封面彩印,内页黑白印刷。 3、 样板需送设计部门封样。 标记 MARKER 1. 变更内容 修改日期 即日起更改说明书页码3、5、39、40、41内容 删除原先说明书40页 2014.4.
B25SE Side by side frost free fridge freezer s
USER MANUAL FOR YOUR BAUMATIC B25SE 545 Litre side by side frost free fridge freezer NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5-6 Specifications of your fridge freezer Description of the appliance Fridge section (including door) Freezer section (including door) 7-10 8 8 8 Using your Baumatic fridge freezer Before switching on During first use Control panel Switching on the appliance Setting the temperature manually (freezer section) Setting the temperature manually (fridge section) Switching on fast freeze mode Switching on rapid cooling mode Switching on holiday mod
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your fridge freezer Dimensions of your appliance o Height: o Width: o Depth: 1760 mm 902 mm 750 mm (Including doors and handles) Energy efficiency class o Energy class: A+ Cubic capacities o Total gross/net capacity: o Gross capacity (fridge/freezer): o Net capacity (fridge/freezer): 545/515 litres 347/198 litres 340/175 litres Specifications of the appliance o o o o o o o o o o o o o o Frost free fridge and freezer Star rating **** (freezer door racks **) Multi airflow cooling syst
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located inside of the fridge section, on the left side. You will need to open the door of the fridge section and you may need to remove one of the middle safety glass shelves. The rating plate will indicate the ambient temperature range that your appliance will function correctly within.
Description of product features (fridge) Safety glass shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove. Pull the shelf forwards (a), then lift the front of the shelf (b) towards 90° and carefully pull it out of the grooves (c). o The upper shelves should be used to store pasta, canned food, milk etc.
Description of the product features (freezer) Safety glass shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove. Pull the shelf forwards (a), then lift the front of the shelf (b) towards 90° and carefully pull it out of the grooves (c).
Using your Baumatic fridge freezer Before switching on o Remove all packaging materials before using the fridge freezer. This includes the foam base and all adhesive tape holding the refrigerator accessories in place both inside and outside the appliance. o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply.
Control panel The control panel is located outside the refrigerator, above the ice dispenser. It is used to control the fridge and freezer. Switching on the appliance o You switch on your appliance by connecting it to your mains supply. o When first turned on the appliance will automatically set the fridge to 5°C, and the freezer to -18°C. You can set the temperature in the fridge and freezer sections manually at any time.
Manually setting the freezer temperature. o Press the ‘FRZ TEMP’ button once and the freezer icon will start to flash. Then press the ‘FRZ TEMP’ button again to adjust the temperature of the refrigerator. o The temperature will change 1°C each time the ‘FRZ TEMP’ button is pressed and will scroll through a range of -16°C – -24°C The chosen temperature will take effect after 5 seconds.
Switching on rapid cooling mode This setting should be used if you want to chill something quickly, it will ensure that a powerful supply of cold air enters the fridge section. o Press the ‘QUICK REF’ button on the display. The ‘QUICK REF’ indicator will flash. o Press the ‘LOCK/UNLOCK’ button to confirm, and the rapid cooling mode will turn on. o You can manually return the appliance to normal operation by unlocking the control panel and pressing the QUICK REF button once.
Switching on energy saving mode This setting should be used if you wish to save energy when using your appliance. It will increase the temperature slightly in the fridge and freezer sections to save energy. o Press the ‘ENERGY SAVING’ button on the display to turn energy saving mode on and off. When it is on the energy saving symbol will be illuminated.
Using the ice/water dispenser Before first use You should not attempt to dispense ice for 6 hours after the appliance is first connected to your mains supply. o Once the fridge and freezer sections have cooled sufficiently place a cup against the PUSH pad in the dispenser and pour out a couple of glasses of water/ice. o IMPORTANT: These first couple of glasses of water/ice should not be consumed and should be poured down the sink. This is to flush the system of potential impurities.
o When the dispenser is producing ice, you should remove the cup/glass from the dispenser chute when it is half full, otherwise you may get ice overflowing or the dispenser outlet could become blocked. IMPORTANT: To protect the motor, the dispenser will automatically shut off after 1 minute of continuous use. Releasing the pad and waiting a moment will reset the motor and you can continue to use the dispenser.
o If the ice is STILL discoloured after changing the water filter, then contact the Baumatic Customer Care Department. o If there is a power cut you should remove all ice from the ice cube storage case. If you leave the ice in the storage case, then it will melt and water will flow into the main section of the freezer. o DO NOT insert your fingers or any tools into the dispenser outlet.
o Lift the ice maker up (1) and then pull the storage case (2) to remove it from the freezer. o To put the ice maker back into position, locate it into the side grooves of the cabinet and push it back into place. Water filter change icon o the water filter needs to be replaced approximately every 6 months. The WATER FILTER icon will come on to show when the filter needs to be replaced.
Arranging and storing food in the fridge section o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increase the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a strong flavour. You should use polythene bags or sheets, aluminium foil, wax paper. Liquids should be stored in covered containers or bottles.
o Cheese and butter should be placed in airtight containers, or they can be wrapped in aluminium foil or polythene bags. As much air as possible should be removed from the bags. o Milk bottles should have a cap on them and be stored on the bottle shelves that sit in the door. o Garlic, potatoes, onions and bananas should only be stored in a refrigerator IF they are stored in airtight containers. The **** freezer section The freezer section is suitable for storing and freezing food.
Freezing fresh food o To freeze the maximum quantity of fresh food specified above, you should set the freezer to fast freeze mode (see page 13), 24 hours prior to attempting freezing. o To freeze smaller quantities of fresh food, you should set the freezer to fast freeze mode a few hours prior to attempting freezing. o Fresh food should be packed into airtight containers or packaging. This will help to make sure that the food doesn’t dry out or lose its flavour.
Storing commercially frozen food o The storage time and recommended temperature for storing commercially frozen foods are indicated on the packaging. o Always follow the manufacturer’s instructions for storage and use of frozen food. o When shopping, be careful to choose food which is adequately packed and is provided with complete storage instructions. It should have been stored in a freezer where the temperature does not rise above -18°C. o Do not buy packages of food that are covered with frost.
Compressor noise o There will be an operating noise when the compressor is running. o After installation, the compressor may be noisier for a short period of time. o A similar noise can be caused by the ice dispenser motor. Bubbling and burbling sound o This noise is emitted as the coolant flows through the pipework within the fridge. Water flowing sound o This is caused by water flowing into the evaporating tray during the defrosting process and can be heard whilst the fridge is defrosting.
Cleaning and Maintenance: o Occasionally clean the condenser coils (if present) at the back of the appliance to maintain a high performance level. o Clean the door gasket with warm water or a neutral detergent that leaves no residue. A tight-sealing door gasket is critical to the efficiency of your appliance. Usage: o Do not open the door repeatedly or more frequently than you have to. o Do not set the thermostat too low. A change of just one degree can effect the energy consumption by 5%.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The refrigerator and freezer section should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
Fridge and freezer shelves o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove. Pull the shelf forwards (a), then lift the front of the shelf (b) towards 90° and carefully pull it out of the grooves (c). Salad crisper drawers o To remove a drawer, lift up a little and pull forward. Interior parts o Use a cloth that has been wetted with water and mild (neutral) detergent and wipe over the interior parts of the appliance.
Dispenser shelf o Take out the spillage grill and use a cloth to remove water from and clean this area. DO NOT USE ANY FORM OF ASOLINE (PETROL) OR BENZENE (BENZOL) THINNERS ON ANY AREA OF THE APPLIANCE. AS THESE CHEMICALS CAN DAMAGE THE SURFACES. The defrost drain hole o Defrosting occurs automatically in the fridge section during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The drain hole should be cleaned periodically with the drain hole cleaner.
o Use a solution of bicarbonate of soda and lukewarm water to clean the evaporating tray. o IMPORTANT: It is normal to get some ice droplets forming on the back wall of the appliance. The formation of ice droplets does not indicate an appliance fault. Defrosting the freezer section Your appliance is frost free, so you should not need to manually defrost the freezer section.
o With dry hands, reconnect your appliance to your mains supply. You should activate fast freeze for a 24 hour period, before returning it to the normal temperature setting of at least -18°C o You should not attempt to freeze fresh food inside the freezer section until this 24 hour time period has elapsed. o Do not defrost the appliance with other electrical devices (e.g. hair dryer). Do not use sharp metal objects to remove the ice on the freezer, as this could cause damage to the refrigerant system.
o Your refrigerator comes supplied with a 13 amp plug fitted. If in future you need to change the fuse in this plug, then a 13 amp ASTA approved (BS 1362) fuse must be used. o The refrigerator should not share a multi-purpose socket with other electrical appliances.
o Your appliance should not be located in direct sunlight or exposed to continuous heat or extremes of temperature (e.g. next to a radiator or boiler). If this is not feasible, then you should install an insulation plate between the appliance and the adjacent heat source. o You should check whether there is an electrical socket available, which will be accessible after your appliance is installed. o Place the appliance flatly and firmly on a solid base.
Removing the fridge and freezer doors WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO REMOVE EITHER OF THE DOORS. o Remove the hinge cover that sits on the top of the appliance. o Disconnect the electrical connection point that sits underneath the hinge cover. o Undo the three bolts that hold the upper hinge in place.
o IMPORTANT: One person should support the door before attempting this next step. Lift up the front of the hinge and remove it from the appliance. o Whilst still supporting the door, slowly lift it upwards to disengage it from the lower hinge. Once the door has been lifted clear of the lower hinge, pull it away from the main chassis of the appliance. o IMPORTANT: The door should be lent carefully against a wall, so that the inner or outer surfaces cannot be accidentally damaged.
Installing the decorative plinth o A decorative cover for the base of the appliance can be installed if you wish however it is not essential. The plinth is for decorative purposes only and will not affect the refrigerator’s performance. o The plinth should be installed using the 3 screws as shown in the diagram below: The water inlet hose and water filter o The water pressure should be 2.06 - 6.89 bar / 30-100 psi to allow the icemaker to operate correctly.
Connecting the water inlet hose and water filter 1) Connection the water inlet hose to the connector on the rear of the appliance. 2) Place the seal inside of connector A and then screw connector A securely onto your cold water mains supply. Push the water inlet hose firmly onto connector A. o Ensure that the water tap which the inlet hose is connected to is fully open.
IMPORTANT- The running of water through the inlet hose and filter must be done, to make sure that any impurities from the manufacturing process are washed out. o Check thoroughly for any leaks. IMPORTANT- If there are any signs of water leaks, you should follow the installation procedure stage by stage again. Troubleshooting IMPORTANT: If your fridge freezer appears not to be operating properly, before contacting the Baumatic Customer Care Department, please refer to the checklist below.
My fridge freezer is noisy. o The refrigerant gas that circulates the pipe-work of the appliance may make a slight noise, even if the compressor is not running. o If the noise worsens or the appliance gets louder than normal; check that it is levelled off correctly, that nothing is touching the rear of the fridge freezer and that nothing placed inside the appliance is rattling.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic Customer Care on telephone number (0844) 692 3605. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
Technical Data Manufacturer Model Number Product Category Energy Efficiency Class (1) Annual Energy Consumption (2) Storage Volume of Fridge Compartment Storage Volume of Freezer Compartment Star Rating Frost Free Compartments Temperature Rise Time Freezing Capacity Climate Class (3) Noise Level Installation Type BAUMATIC B25SE 7 – Refrigerator-Freezer A+ 427 kWh 340 litres 175 litres 4 (2 for door racks) Fridge and Freezer 5 hours 10kg/24hr N, ST 47 dB Freestanding (1) On a scale from A+++ (highest effic
United Kingdom Baumatic, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Customer Care Telephone 0844 692 3605 Spares Telephone 0844 692 3606 Website: www.baumatic.co.
www.baumatic.co.
