Operation Manual

Removing the inner door glass for cleaning
23
o Remember that if the surface of the glass panel becomes
o oor glass can be lifted out after
removing the fixing screws and turning the metal stoppers that
d the correct way round, before turning the
metal stoppers back to their original position and fully tightening
the door glasses, and inside the inner frame as some of
ybe sharp due to the manufacturing process.
o Do not use any abrasive cleaner that could cause damage.
scratched, this could lead to a dangerous failure.
To facilitate cleaning, the d
hold the glass in position.
o When refitting, make sure that the glass is correctly seated in
the door recess an
the fixing screws.
o IMPORTANT: Care must be taken when cleaning between
the edges ma
LATION INSTAL
The installation must be carried out by a suitably
ualified person, in accordance with the current
UK Regulations and Safety Standards or their European
Building Regulations (issued by the Department of the
Building Standards (issued by the Scottish Development
o Electricity At Work Regulations.
q
version of the following.
o
Norm Replacements.
o
Environment).
o
Department).
o IEE Wiring Regulations.