Operation Manual

16
o The audible signal has three different settings, low, medium and
sure that the
timer is in manual mode. Then press and hold the minus button
o Press the minus button again and the audible signal will adjust to
o When the required level of audible signal is reached, release the
nd temperature
Adjusting the audible signal
high.
o To adjust the level of the audible signal, make
and you will hear the current level that is set.
the next level.
minus button and it will be set.
Selecting a cooking function a
e
. Before
ou can select a cooking function or set a temperature, you
To select manual operation mode, press the manual operation
n the control panel.
nction (the B152 and B180 only have the
fan oven function) and turn the thermostat dial to its maximum
It is perfectly normal for a smell to be produced during this
o You should make sure that any windows in the room are left
o It is advisable for you not to remain in the room whilst the
o You should leave the oven on maximum setting for 30 – 40
minutes.
Selecting manual operation mode
After your appliance is connected to your mains supply for th
first time, the numbers on the timer display will flash
y
must set the appliance into manual operation mode.
o
button (9) o
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven fu
temperature setting.
o
process.
open during this process.
burning off process is taking place.