Technical data

Voltage 230 V ac 50Hz

Total electrical connected load AS6.2 – 6.6kW B13/B14 - 6.0 kW B15/BF15 – 6.4kW

B16/BF16 – 7.2kW B45 – 4.8kW

Supply connection must be via a switched double-pole isolator with 3mm contact

separation.

Mains supply connection cable: 3 x 2.5mm2 type H05 RR-F <HAR> marked

Unpacking the appliance.

When unpacking the appliance please check that the following items are contained within the

packaging:

1 Baumatic hob

1 Ceramic hob scraper

1 Installation / Instruction manual

1 Baumatic guarantee card

4 Fixing brackets

4 Fixing screws

4 Spring clips

1 Sealing strip

Before using your hob for the first time.

We recommend that before using your new appliance for the first time that you clean the hob surface

using hot soapy water (do not use any abrasive cleaners) this will remove any remnants that have

been left behind during the manufacturing process. Ensure that any labels and protective films are also

removed.

Check each cooking zone individually in turn, by turning each zone to the maximum setting, The first

time the appliance is switched on it may emit an odor this will only last for a short period and will

disappear with use.

Do not install this product if there are obvious signs of transportation damage, in such rare cases

please refer this to your supplier.