User manual

ACEManual rev.080614

additional light is needed even in a dark room.

Speakers

Any material with printed text placed in front of the Ace will be read out loud using built-

in speakers. Alternatively, headphones or a Braille display can be plugged in, or the

Reading Mode can be set to Text Mode for those who prefer to read silently.

Position

The top of the device has a panel with a set of Daisy arrow buttons on the left side, a

large round button in the center, a volume knob on the right toward the back, and a

half-moon shaped Scan Button. The front of the device has a Screen with a thumb

wheel (Roller) at the top of each side. When taking the device out of the box and

setting it up to scan a document, place the device on a flat surface with the front of the

device facing you and the top panel facing the ceiling. It must be in this upright, flat

position when scanning a document, but after it is scanned, you can hold the device

comfortably on your lap, tilted however you would like while listening or reading.

Buttons, Controls, Connections

The diagrams below have pictures of the device, with the first one showing the top and

front view, and second showing the left side panel. All of the buttons and controls are

labeled. Below the diagrams, each button and control is described. If you are reading

this manual using this device, please be aware that the labels on the diagram will not

be converted verbatim. A full description of each labeled item starts after each diagram.