User manual

4
ACEManual rev.092914
additional light is needed even in a dark room.
Speakers
Any material with printed text placed in front of the Ace can be read out loud using
built-in speakers. Alternatively, headphones or a Braille display can be plugged in, or
the Reading Mode can be set to Text Mode for those who prefer to read silently.
Position
The top of the device has a panel with a set of Daisy arrow buttons on the left side, a
large round button in the center, a volume knob on the right toward the back, and a
half-moon shaped Scan Button. The front of the device has a Screen with a thumb
wheel (Roller) at the top front of each side. When setting up the Ace to scan a
document, place the device on a flat surface with the front of the device facing you and
the top panel facing the ceiling. It must be in this upright, flat position when scanning a
document, but after it is scanned, you can hold the device comfortably on your lap,
tilted however you would like while listening or reading.
Buttons, Controls, Connections
The diagrams below have pictures of the device, with the first one showing the top and
front view, and second showing the left side panel. All of the buttons and controls are
labeled. Below the diagrams, each button and control is described. If you are reading
this manual using this device, please be aware that the labels on the diagram will not
be converted verbatim. A full description of each labeled item starts after each diagram.