User manual

Battery Status: xxx% OK.

Battery Status: xxx% OK

5.1.5 Bluetooth name

This line shows the Bluetooth name which is used to identify SuperVario on mobile

devices.

Bluetooth Name: xxxxxxxx.

Bluetooth Name: xxxxxxxx

NB: The Bluetooth PIN is „1234“

5.1.6 Quit Menu

Press one of the cursor routing keys above the word “off” to quit the menu

Menu off

5.2 The advanced System Menu

The additional options in the advanced system menu allow you to optimise the set-up of

your Braille display. You can change the power off timer settings, sound, interface and

protocol, or restore the factory settings.

All settings are saved as soon as you quit the System Menu.

All current and selected settings are indicated by Braille dots 7 and 8 underneath the

relevant value. To select, simply press one of the cursor routing keys above the relevant

value.

Open the advanced System Menu by first pressing both outer cursor routing keys, and

then both upper display keys (on SuperVario 40: P1, P40, D1, D4). Hold all four keys for at

least 5 seconds or until the device beeps.

The menu will open at the first entry “BAUM SuperVario2 40”; use D1 and D3 to browse

through the menu options.

The first four lines in the advanced menu are identical to the basic menu (device name,

status, serial number, battery status).

5.2.1 Protocol

If you want to use SuperVario2 with screenreaders where no driver is availbale, you can

setup SuperVario2 to use a different protocol (emulation). Default ist the „BAUM“ protocol