User manual

5.1 The basic System Menu.
NB: If reading this document as an RTF file on the PC, the BlackBrl.ttf font must be installed
from the accompanying installation CD so that the Braille version of the menu can be seen,
otherwise only cryptic symbols will appear. As each line is also written in text, this is not
strictly necessary.
5.1.1 Name of the Braille display
This is the first entry in the System Menu. It displays the name of the Braille display.
Depending on the model:
BAUM SuperVario2 80
BAUM SuperVario2 64
BAUM SuperVario2 40
BAUM SuperVario2 32
BAUM SuperVario2 24
BAUM SuperVario2 40
5.1.2 Status
This line shows battery status (charging percentage), active communication channel,
protocol and version number of firmware.
Stat: bb% ccc pppp Vxxx
Stat: bb% ccc pppp Vxx
bb = charging percentage.
ccc=active communication channel (USB, HID or Bluetooth)
ppp= protocol
Vxx = Firmware-Version
5.1.3 Serial number
This shows the serial number of the Braille display
Serial Number: xxxxxxxx.
Serial Number: xxxxxxxx
5.1.4 Battery status
This line shows the current charging percentage of the built in battery followed by OK or
LOW if the battery is almost down and charging is strongly recommended. SuperVario can
be used while charging the battery.
14