User manual

4 Description of the device

Off

4.1 Keys and operators

The Power button is located in a deepening at the back of the top left side of the Braille

display. To turn the device on or off, press and hold this button for approximately 3

seconds. SuperVario2 will confirm power on and off with a beep.

On the front are the Braille cells. Depending on the model you have, there are 24, 32, 40, 64

or 80 Braille cells. Behind each Braille cell, there is a little button, the cursor routing key.

There are six more buttons, three to the left of the Braille cells and three to the right.

These buttons are numbered like Braille dots. The three to the left are, starting from the

back D1, D2 and D3 the one nearest to you. On the right side, the numbering is D4, D5 and

D6 is the one nearest to you. Functionality of keys depends on the screen reader (COBRA,

VIRGO, Blindows, JAWS, Talks, Mobile Speak etc.)

At the left side of SuperVario, you will find the rectangular plug of the USB interface. Use

the cable that came with your Braille display to connect via USB to a PC. SuperVario2 has a

industry standard Mini USB plug, so you can also use standard Mini-USB cables.

SuperVario2 allows for charging batteries through USB.

Bluetooth, being a wireless connection, has no plug. The antenna is integrated into the

device, there is nothing visible or tangible.

4.2 Power on off, Reset

Holding the power button for aprox. 3 seconds will turn on/off the device. A beep will

anounce that it is switched on (or off). The Power button is located in a deepening at the

back of the top left side of the Braille display.