User manual

14
General Settings. Then, scroll to and select Reading Mode. Scroll to your desired
option (Voice Mode or Text Mode), and set it with the Action Button.
Voice Mode
The Voice Mode is the default mode.
Use this mode to hear the text read aloud. After the scan button is pressed, the device
automatically starts reading within a few seconds. To pause/resume reading, press the
Action Button. Scanned text is formatted and displayed on the screen in high contrast.
Voice Mode Settings
Reading Speed:
This setting allows adjustment of the speed in which the document is read aloud. If you
would like to be able to adjust the reading speed with the Left Roller while reading a
document, you can choose to set the Left Roller Mode to “Reading Speed.” You can
also set a Reading Speed from the General Settings Menu which will keep the reading
speed at a set pace you choose once. By default, the Left Roller Mode will be set to
Font Magnification, which will allow you to control the font size as you read. If you
would rather use the Left Roller to control reading speed as you read instead of using it
to control Font Magnification as you read, you can switch the Left Roller Mode to
“Reading Speed” by doing the following:
From the Main Menu, scroll to and select Settings, and then select “General Settings.”
Next, scroll to and select Left Roller Mode. Finally, select Reading Speed.
To change and set the Reading speed from the Settings, begin at the Main Menu.
Scroll to and select Settings. Next, scroll to and select General Settings. Then, scroll to
and select Reading Speed. Next, scroll between the speed values from 1 (the slowest)
to 10 (the fastest). Stop at your preferred speed and set it with the Action Button.
Voice/Language:
To adjust the setting for your preferred reading voice or language, start at the Main
Menu. Scroll to and select Settings option. Then, scroll to and select General Settings.
Next, scroll to and select Voice. Next, scroll through available language/voice
combinations and select your preference.
The reading language and language of the document need to match in order for the
text recognition to be accurate.
To Navigate Through Text: