Setup and user guide

3
EN
To activate/deactivate the Freeze Control function press and
hold for 3 seconds the Party Mode button.
The function works properly in a dened range of temperature:
between ‐22°C and ‐24°C. When the function is engaged and
the current temperature in the freezer is set to the warmer set
point than ‐22°C, the temperature is automatically set to ‐22°C
to match the working range.
If the function is engaged and the user modify the freezer
temperature out of the working range, the function is
automatically switched o.
In case of Fast freezing is engaged, the function “Freeze control”
is inhibited until the Fast Freezing function switched o.
PARTY MODE
Press to activate/deactivate the Party Mode function.
Use this function to chill drinks inside the freezer compartment.
Important: do not leave the bottle inside the freezer
compartment longer than the function is active (30 minutes).
FAST COOL
Using Fast Cool function it is possible to increase the cooling in the
refrigerator compartment. The use of this function is recommended
when placing a very high quantity of food in the refrigerator
compartment. Press & hold for 3 sec. the Fridge °C button to
activate Fast Cool function. When activated, the Fast Cool indication
will be displayed by the Fridge Temperature LEDs as shown in the
beside sequence. The function is automatically disabled after 6
hours, or can be manually disabled by pressing Fridge °C button.
FAST FREEZE
The use of this function is recommended when placing a very high
quantity of food to be frozen in the freezer compartment. 24 hours
before freezing fresh food, press & hold for 3 sec. the Freezer
button to activate the Fast Freeze function.
When activated, the Fast Freeze indication will be displayed by the
Freezer Temperature LEDs as shown in beside sequence. After 24
hours place the food to be frozen in the upper basket of freezer
compartment. The function is automatically disabled after 48
hours, or can be manually disabled by pressing Freezer °C button.
ZERO 0 BIOZONE COMPARTMENT
The Zero0 BioZone compartment is specically designed to
maintain a low temperature and a suitable humidity level, in order
to keep foods fresher for longer (e.g. meat, sh).
Activating and deactivating the compartment
To activate/deactivate the Zero0 BioZone compartment, press the
dedicated button on the control panel ( indicator in the gure
below).
Zero0 BioZone compartment o: button partially
lighted
Zero0 BioZone compartment ON:button fully lighted
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs
light, allowing a better lightning as well as a very low energy
consumption.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when
the refrigerator door is opened. If the door is kept open for more
then 10 minutes the light will be automatically switched o.
FAN + ANTIBACTERIAL FILTER
The Fan improves temperature distribution
inside the refrigerator compartment, allowing
better preservation of stored food.
If the appliance has the Fan it can be equipped
with the antibacterial lter.
Remove it from the box placed in the crisper
drawer and insert into the fan cover - as in the
picture.
The replacement procedure is included in the lter box.
ALARM TABLE
ALARM TYPE Signal Cause Cure
Door open
alarm
The acoustical alarm is activated and the
Alarm Indicator blinks.
The Fridge or Freezerdoor has
remained open for more than 2
minutes.
Close the door or press the Stop Alarm to
mute the acoustical alarm.
Temperature
alarm
The Temperature display blinks (°C) and
the Alarm Indicator remains on.
The inside temperature is not
adequate.
Press the Stop Alarm button ; the acoustical
alarm stops, the Temperature Display (°C)
blinks and the Alarm Indicator remains on
until a temperature < -10°C is reached.
Long black-out
alarm
The Black Out Alarm icon remains on, the
Alarm indicator blinks and the
Temperature display (°C) blinks, showing
the maximum temperature reached
during blackout
Prolonged power failure, able
to cause the inside temperature
to increase to 0°C.
Press the Stop Alarm button; the acoustical
alarm stops, the Temperature Display (°C)
blinks and the Alarm Indicator remains on
until a temperature < -10°C is reached.
Malfunction 3 central LEDs in the Freezer Temperature
LEDs blinks on the display.
Product malfunction. Contact the After-sales Service.