Setup and user guide

EN
3
If the function is engaged and the user modify the freezer
temperature out of the working range, the function is
automatically switched o.
In case of Fast freezing is engaged, the function “Freeze
control” is inhibited until the Fast Freezing function switched
o.
PARTY MODE
Press to activate/deactivate the Party Mode function.
Use this function to chill drinks inside the freezer
compartment.
Important: do not leave the bottle inside the freezer
compartment longer than the function is active (30 minutes).
FAST COOL
Using Fast Cool function it is possible to increase the cooling
in the refrigerator compartment. The use of this function is
recommended when placing a very high quantity of food
in the refrigerator compartment. Press & hold for 3 sec.
the Fridge °C button to activate Fast Cool function. When
activated, the Fast Cool indication will be displayed by the
Fridge Temperature LEDs as shown in the beside sequence.
The function is automatically disabled after 6 hours, or can be
manually disabled by pressing Fridge °C button.
FAST FREEZE
The use of this function is recommended when placing
a very high quantity of food to be frozen in the freezer
compartment. 24 hours before freezing fresh food, press &
hold for 3 sec. the Freezer button to activate the Fast Freeze
function.
When activated, the Fast Freeze indication will be displayed
by the Freezer Temperature LEDs as shown in beside
sequence. After 24 hours place the food to be frozen in
the upper basket of freezer compartment. The function is
automatically disabled after 48 hours, or can be manually
disabled by pressing Freezer °C button.
ZERO 0 BIOZONE COMPARTMENT
The Zero0 BioZone compartment is specically designed to
maintain a low temperature and a suitable humidity level, in
order to keep foods fresher for longer (e.g. meat, sh).
Activating and deactivating the compartment
To activate/deactivate the Zero0 BioZone compartment, press
the dedicated button on the control panel ( indicator in the
gure below).
Zero0 BioZone compartment o: button partially lighted.
Zero0 BioZone compartment ON:button fully lighted.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption. If the LED light system does not work,
please contact the Service to replace it.
Important: The refrigerator compartment light switches
on when the refrigerator door is opened. If the door is kept
open for more then 10 minutes the light will be automatically
switched o.
FAN + ANTIBACTERIAL FILTER
The Fan improves temperature distribution
inside the refrigerator compartment, allowing
better preservation of stored food.
If the appliance has the Fan it can be
equipped with the antibacterial lter.
Remove it from the box placed in the crisper
drawer and insert into the fan cover - as in the picture.
The replacement procedure is included in the lter box.
ALARM TYPE Signal Cause Cure
Door open
alarm
The acoustical alarm is activated
and the Alarm Indicator blinks.
The Fridge or Freezer door has
remained open for more than
2 minutes.
Close the door or press the Stop Alarm
to mute the acoustical alarm.
Temperature
alarm
The Temperature display blinks
(°C) and the Alarm Indicator
remains on.
Inside the Freezer the
temperature is not adequate.
Press the Stop Alarm button; the
acoustical alarm stops, the Temperature
Display (°C) blinks and the Alarm
Indicator remains on until a temperature
< -10°C is reached.
Party Mode
alarm
The Party Mode Indicator blinks
and the acoustical alarm is
activated.
30 min. elapsed since Party Mode
function has been activated. It is
time to take out the bottle from
the freezer (see Use and Care
Guide for more details).
Long black-out
alarm
The Black Out Alarm icon remains
on, the Alarm indicator blinks
and the Temperature display (°C)
blinks, showing the maximum
temperature reached during
blackout.
Prolonged power failure,
able to cause the inside
temperature to increase to 0°C.
Press the Stop Alarm button; the
acoustical alarm stops.
Malfunction 3 central LEDs in the Freezer
Temperature LEDs blinks on the
display.
Product malfunction. Contact the After-sales Service.
ALARM TABLE