Setup and user guide

2
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically.
After starting the appliance, wait at least 4-6 hours
before placing food into the fridge and into the freezer
compartment.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge compartment settings light-up.
FUNCTIONS
ON/STANDBY
To put the product in Stand-by, press and hold the On/
Stand By button for 3 seconds. All the indicators turn o
except On/Standby indicator.
Press again to reactivate the appliance.
FRIDGE TEMPERATURE LEDs
To adjust the Fridge Temperature, press the Fridge °C button.
The Fridge Temperature can be adjusted between +2°C and +
8°C, as shown by the Fridge Temperature LEDs.
FREEZER TEMPERATURE LEDs
To adjust the Freezer Temperature, press the Freezer °C
button. The Freezer Temperature can be adjusted between
-16° C and -24°C, as shown by the Freezer Temperature LEDs.
PRO FRESH
This function automatically works to ensure the optimal
conditions to preserve the stored food. If there are any
variations, Pro Fresh immediately restores the ideal
conditions. Results are outstanding: freshness preserved at
best throughout the fridge cavity up to 4 times longer.
SMART DISPLAY
This optional function can be used to save energy. To activate
the Smart Display, press Fridge °C and Freezer °C buttons at
the same time for 3 seconds until an audible signal sounds.
To deactivate this function repeat the same procedure.
Remember that this function does not disconnect the
appliance from the power supply, but only reduce the power
consumed by external display.
FREEZE CONTROL
Freeze Control is an advanced technology that reduces
temperature uctuations in the whole freezer compartment
to minimum, thanks to an innovative air system, totally
independent from the fridge. Freeze burns are reduced up to
60% and food preserves its original quality and color.
To activate/deactivate the Freeze Control function press and
hold for 3 seconds the Party Mode button.
The function works properly in a dened range of
temperature: between ‐22°C and ‐24°C. When the function
is engaged and the current temperature in the freezer is
set to the warmer set point than ‐22°C, the temperature is
automatically set to ‐22°C to match the working range.
ACCESSORIES
EGG TRAY CHEESE BOX BOTTLE RACK
BOTTLE SEPARATOR FREEZER DRAWER DIVIDER FRIDGE DRAWER DIVIDER
QUICK ICE COMPARTMENT EUTETICS/QUICK ICE TRAYS
FIRST TIME USE
DAILY USE
See Use and Care Guide for more details on functions / see last
page for information on how to obtain the Use and Care Guide