Operation Manual

GB14
1. Control panel.
2. Grease filters (over the perimeter extraction panel).
3. Halogen lamps.
4. Telescopic flue.
5. Perimeter extraction panel.
Control panel
a. Light ON/OFF button
b. Motor ON/OFF and minimum speed (extraction power) selection button
c. Medium speed (extraction power) selection button
d. Maximum speed (extraction power) selection button
DESCRIPTION AND USE OF HOOD
- Disconnect the appliance from the power supply
Cleaning the perimeter extraction panel
Removal:
pull the panel (FRONT) firmly downwards.
Cleaning:
Clean the extraction panel as often as the grease filter.
The steel of the extraction panel has iXelium surface treatment.
To clean it, proceed as follows:
• Use a soft cloth (preferably microfiber) wetted with water or with a normal glass cleaner.
• Do not use paper towels, as they may leave marks and bits of paper on the panel.
• Do not use abrasive, corrosive or chlorine-based products, or steel wool.
• Do not use steam equipment.
• Do not use flammable products.
• Do not leave acid or alkaline substances such as vinegar, mustard, salt, sugar or lemon juice on the panel.
DO NOT USE ALCOHOL!
Fitting:
The panel must be fixed at the front, fitted in the special pins on the hood.
IMPORTANT: Always make sure the panel is firmly fixed in place.
ATTENTION:
MAINTENANCE
abcd