Instruction for Use

GB6
Control panel
Light: move the switch to the right or press the next button to switch on.
Extraction speed: Move the switch to the right or press the next button to increase extraction speed.
Note: You should open the visor N every time you switch on the hood in order to use it correctly.
Grease filter - can be one of the following types:
Paper filter: to be replaced once a month or, if the top part is coloured, when the colour shows through the holes in the grille.
Metal filter: to be washed once a month by hand or in a dishwasher with quick wash cycle at low temperature.
To access the grease filters open the grille by means of the releases E1 and free it from the retainers R1.
The carbon filter (*) must be changed once a month.
Attention! The metal filter may become opaque over time; this does not affect its filtering capacity.
Replacing lamp/s - Remove the grille and the lamp to be replaced. Refit the grille.
DESCRIPTION AND USE OF THE HOOD
Lamp
Power
(
W)
Socket
Voltage
(
V)
Dimen
sion
(mm)
ILCOS D Code (
accordin
g IEC
61231)
28
E14
230
67
(Light Center Len
gth
)
HSGSB/C/UB-28-230-E14-67