User guide

3
EN
PROGRAMS TABLE
Instructions on wash cycle selection.
ECO
Normally soiled crockery. Standard program, the most ecient in
terms of its combined energy and water consumption.
SENSOR
For normally soiled dishes with dried food residues. Senses the level of
soiling on the dishes and adjusts the program accordingly. When the
sensor is detecting the soil level an animation appears in the display
and the cycle duration is updated.
INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
DAILY
Normally soiled crockery. Everyday cycle, that ensures optimal
cleaning performance in shorter time.
GOOD NIGHT
Suitable for night-time operation of the appliance. Ensures optimal
cleaning and drying performance with the lowest noise emission
EXPRESS 30’
Program to be used for lightly-soiled dishes with no dried food
residues.
GLASS
Program for delicate items, which are more sensitive to high tempera-
tures, for example glasses and cups.
PRE-WASH
Use to refresh crockery planned to be washed later. No detergent to be
used with this program.
Notes:
Please note that cycles like Express or 1h Wash&Dry are most eective for
lightly soiled dishes.
To reduce consumption even further, only run the dishwasher
when it is full.
PROGRAMS DESCRIPTION
Program
Drying
ActivEco
Available
options
*)
Detergent
container
Duration
of wash
program
(h:min)
**)
Water con-
sumption
(litres/cycle)
Energy con-
sumption
(kWh/cycle)
Tub
B
1. Eco 50° 3:10 9,5 0,93
2. Sensor
50-
60°
1:25 - 3:00 7,0 - 14,0 0,90 - 1,40
3. Intensive 65°
-
-
2:50 16,0 1,60
4. Daily 50° - 1:35 13,0 1,15
5. Good Night 50°
-
- 3:30 15,0 1,15
6. Express 30’ 50°
- -
- 0:30 9,0 0,55
7. Glass 45°
- -
1:40 11,5 1,20
8. Pre-Wash
- - - - -
0:12 4,5 0,01
ECO program data is measured under laboratory conditions according to European Standard EN 50242. Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address: [e-mail]
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary
depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,
load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Standby consumption: Left-on mode consumption: 6 W - O mode consumption: 0.5 W