Instruction manual

After Sales Support
Telephone: [phone]
Internet: www.winplus.com.au
51
SR600EX
USER’S GUIDE
51
b. The connecon to the Home Network may be down. Use an Ethernet cable and connect directly to
the Wi-Fi Range Extender. Access hp://setup.bauhnwireless.com and run through the Smart Setup
Wizard again. Aer you have successfully reset the Home Network/Hot Spot connecon, try
connecng wirelessly again.
I can no longer access the Web Menu or the Wi-Fi Range Extender no longer responds.
a. Connect to your Wi-Fi Range Extender and try to access hp://setup.bauhnwireless.com using your
web browser.
b. If you are advanced in networking troubleshoong, log onto your home router’s web interface. Look
for the DHCP client list and try to find the IP address of your Wi-Fi Range Extender assigned by your
home router. Once
you have it, connect to the Wi-Fi Range Extender using an Ethernet cable. Open
your web browser and enter the IP address into the address bar.
c. Reset the Wi-Fi Range Extender back to default sengs and try the Smart Setup Wizard again. To reset
the Repeater back to
default sengs, push the Reset Buon (on the back of the PoE Adapter) down
for five to ten (5-10) seconds then let go. Aer the Wi-Fi Range Extender has fully reset, use an
Ethernet cable and connect to the Wi-Fi Range Extender . Login to the Web Me
nu at
and run through the Wizard.
hp://setup.bauhnwireless.com
SR600EX
USER’S GUIDE
51
b. The connecon to the Home Network may be down. Use an Ethernet cable and connect directly to
the Wi-Fi Range Extender. Access hp://setup.bauhnwireless.com and run through the Smart Setup
Wizard again. Aer you have successfully reset the Home Network/Hot Spot connecon, try
connecng wirelessly again.
I can no longer access the Web Menu or the Wi-Fi Range Extender no longer responds.
a. Connect to your Wi-Fi Range Extender and try to access hp://setup.bauhnwireless.com using your
web browser.
b. If you are advanced in networking troubleshoong, log onto your home router’s web interface. Look
for the DHCP client list and try to find the IP address of your Wi-Fi Range Extender assigned by your
home router. Once you have it, connect to the Wi-Fi Range Extender using an Ethernet cable. Open
your web browser and enter the IP address into the address bar.
c. Reset the Wi-Fi Range Extender back to default sengs and try the Smart Setup Wizard again. To reset
the Repeater back to
default sengs, push the Reset Buon (on the back of the PoE Adapter) down
for five to ten (5-10) seconds then let go. Aer the Wi-Fi Range Extender has fully reset, use an
Ethernet cable and connect to the Wi-Fi Range Extender . Login to the Web Menu at
and run through the Wizard.
hp://setup.bauhnwireless.com
hp://192.168.1.240 and run through the Wizard.
hp://192.168.1.240 using your
hp://192.168.1.240 and run through the Smart Setup