Instruction manual

After Sales Support
Telephone: [phone]
Internet: www.winplus.com.au
16
SR600EX
USER’S GUIDE
15
Scan for a Wireless Network
Click SCAN to begin searching for available wireless networks
to repeat.
Highlight your network and click Next to connue.
If you fail to find any wireless networks, the Wi-Fi Range
Extender may be placed too far from the wireless network
that you are trying to repeat. Move your Wi-Fi Range
Extender closer to the wireless network that you are trying
to repeat and click SCAN again.
The Scan results page will display informaon regarding the
name of the network (SSID), the wireless channel and t
he
network details. AP stands for Access Point and is the standard type of wireless network. The results page will
also display whether or not your network has security and what the signal strength is coming from each
specific network detected. Ensure that the network you are repeang has a signal strength of at least 70%. If
it does not, reorient the Wi-Fi Range Extender or your wireless router to achieve a signal strength of 70% or
greater.
Wi-Fi Range Extender
Wireless Wi-Fi Range Extender