User's Manual

43
WLAN ADSL2+ Route
r
DMZ Setting
Go to Advanced Setup ->NAT -> DMZ to set DMZ parameters. If you have a local client PC
that cannot run an Internet application properly from behind the NAT firewall, you can open the
client up to unrestricted two-way Internet access by defining a virtual DMZ Host.
Static Routing
Go to Advance Setup -> Routing ->Add to setup static route features.
The static routing function determines the path that router follows over your network before
and after it passes through your router. You can use static routing to allow different IP domain
users to access the Internet through this device.