User's Manual

8
WLAN ADSL2+ Route
r
If you have a PSTN telephone line (normal analog line) connect the router as
shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of
the 4 WLAN ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to
the “LINE” port of the supplied splitter. Connect the other supplied RJ11 telephone
cable to the “DSL” port of the splitter and connect the other end of this cable to the
“LINE” port of your WLAN ADSL2+ Router.
3. Connect a RJ11 telephone cable to the “PHONE” port of the splitter and connect
the other end to your telephone.
4. Connect the power adapter to the power inlet “POWER” of the WLAN ADSL2+
Router and turn the “ON/OFF SWITCH” switch of your WLAN ADSL2+ Router on.