User's Manual

11n Repeater User’s Manual
57
Wireless Advanced Settings
This page helps you to setup advanced wireless features,
include Fragment Threshold etc.
From the Wireless menu, click on Wireless Advanced. The
following page is displayed:
Field Description
Fragment
Threshold
When transmitting a packet over a network medium, sometimes the
packet is broken into several segments, if the size of packet exceeds
that allowed by the network medium.
The Fragmentation Threshold defines the number of bytes used for the
fragmentation boundary for directed messages.
RTS Threshold RTS stands for “Request to Send”. This parameter controls what size
data packet the low level RF protocol issues to an RTS packet. The
default is 2347.
Preamble Type This is the length of the CRC (Cyclic Redundancy Check) block for
communication between the router and wireless clients. High network
traffic areas should select Short preamble type.
Radio Power
(Percent)
TX Power measurement.
HT20/40
Coexistence
Disable or Enable 20/40MHz Coexist
Enable WPS Disable or Enable WPS
Disable PIN Disable or Enable PIN
Keep current Disable or Enable current configuration