Product Manual
BatteryMINDer
®
Model SCC180
Rev. E-052115 Page 11 P/N VDC SCC180-MNL
Battery Condition Indicator (BCI)
Your BCI will give you a quick and accurate indication of your battery(s) state
of charge-condition. By properly using your BCI you can determine
whether your battery needs to be charged, is not holding its charge
or needs to be desulfated. This is what you must do if you expect
accurate-helpful results:
ALWAYS test your battery only after it has been charged as fully as possible
with a high power charger (5 -10 Amp rated) and left “rested” for
10 to 24 hours*. If you don’t follow these directives you will obtain
information that is inaccurate or down right misleading. Take your time
and do it right and your battery(s) will reap the benets and so will your
pocketbook.
* “Rested” means a charged battery that has not been recharged or
discharged for a minimum of 10 hours and has had no load attached
to it during this time period.
To BATTERY
To
SOLAR PANEL
AUX
(hard-wired to
Battery Condition
Indicator)
SCC180 with Cover Removed
COVER