Owner's manual

Rev. I-100511 Page 27 P/N VDC28252-AA-Series-MNL
BatteryMINDer
®
Model 28252-AA-Series
Aviation charge mode output control: Factory Presets (defaults)
NORMAL TOLERANCE UNIT
Max Equalizing Time: 4 ±10% Hours Float charging output voltage control: Battery voltage is maintained at
25.8 ~ 26.1
1
±1% Vdc
Max. Float charging current control 5 ±10% Adc Restarts Bulk charging when battery voltage is low: Battery voltage is below 25.2 ±2% Vdc Battery temperature compensation activity conditions: Battery temperature compensation: value for battery voltage (based on value at 25°C)
Battery series -50mV/°C ±25% mV/°C
Max. unloaded output voltage when disconnected from battery:
0.5 max. Vdc
Max. output short-circuit current when disconnected from battery:
3 max. mAdc
Max. ow back current (to unit) when connected to battery, AC power disconnected
3 max. mAdc
Remarks:
1
These voltages are for STANDARD AVIATION setting. The GILL 7000 SERIES, ODYSSEY and HAWKER setting absorption voltage is
29.4V and float is 27.2V. The CONCORDE setting absorption voltage is 28.2V and float is 27.0V.
If Temperature - Voltage Sensor connection is faulty, detached or loose, unit will automatically run in Normal charge mode = NO TEMPERATURE COMPENSATION Repair or replace before using unit at temperature above 80°F or below 60°F