Specifications

20
Quick Release fittings for Seat Height Adjustment
With the locking lever in the loose position, tighten the nut until finger tight. The
final tightening is done by moving the lever to the locked position. To undo move
the lever to the loose position to enable height adjustment.
Loose Locked
Adjusting the Front Suspension
The front suspension can be adjusted for
softness and preload by using the adjusters
on the top of the forks.
To adjust the preload,
locate the tab on the
top of the left fork
tube. Lift the tab and
turn in the direction
shown with the + (PLUS) to increase the preload. Turn in
the direction of the - (MINUS) to decrease the preload.
Fold the tab flat again after use.
The softness of the suspension can
be adjusted with the red dial located
on the top of the right fork tube.
Turn the lever clockwise to choose the softer settings and
anti-clockwise to stiffen the ride. Turning the lever fully
anti-clockwise will "lock" the suspension.
Suspension setting is a matter of personal preference and
may need to be adjusted for a comfortable ride depending
on the terrain.
PRELOAD
ADJUSTMENT
on left fork
SUSPENSION RIDE
SETTING
on right fork