Specifications

19
The rear light requires 2 AA batteries. You will require a small screwdriver to
take off the red lens for battery replacement. It is switched on and off by the
small red push button switch on the rear of the unit.
Either of the types shown above may be fitted.
Braking
To stop, release the throttle and pull the brake levers.
Side Stand
To put the bicycle on its stand:-
1) While holding the bicycle upright, push the stand to its full
extent.
2) Lean the bicycle over onto the stand.
Make sure bicycle is on solid ground.
Do not sit on the bicycle whilst the stand is down. It is
designed to take the weight of the bicycle and not the
additional weight of the rider.