User manual

Removing the Rear Wheel

If you need to remove the rear wheel, for

example, to replace the rear tyre, then the

motor can be unplugged to aid

disassembly. The plug is located in the

small plastic casing as shown, (Right).

Remember to ensure that the cable is

suitably secured to the bicycle frame upon

re-assembly.

Charging Fuse

If the battery will not operate or charge correctly, firstly check the battery fuse

(rated 30A) located on the side of the battery beneath the screw cover. Use a

large flat bladed screwdriver or a small coin to remove the cover.