Specifications

13
Pedal Assistance
There are 6 levels of pedal assistance available from
the motor. Using the UP and DOWN buttons you can
select from level 1, (LOW) to level 6, (HIGH). The motor
will then be activated upon pedalling. There is a rotation
sensor located near the crank which senses when the
pedals are being used.
The speed and power will vary as the level is changed. Refer to the table below
for a guide.
PEDAL ASSISTANCE FROM THE MOTOR
LEVEL PERFORMANCE * EXAMPLE OF USAGE
28 Miles
15.5 MPH
Provides maximum power when negoti-
ating hills and head winds.
Great when needing to simply get from A
to B as fast as possible.
Great for Commuting to work.
32 Miles
13.5 MPH **
42 Miles
12.5 MPH **
Normal Use Mode.
These are the levels to use for everyday
cycling. Gives good performance whilst
maximising usable range per charge.
Best for Leisure Use.
60 Miles
10.5 MPH **
Range Not Tested
8.5 MPH **
Range Not Tested
6.5 MPH **
* Please remember that the above values are provided as a guide. Due to manufacturing tolerances
the speeds and distances may vary.
Weather and terrain will affect the performance. In hilly areas or when the bike is heavily loaded
there will be a significant increase in power used from the battery and hence the range will decrease
accordingly. A lightly loaded bike will achieve higher performance levels.
(These results were obtained by test riders in optimal conditions—75kg rider, level ground, no wind).
** Due to the smaller wheel size, the QUARTZ model may exhibit speeds slightly lower than those
stated in the table for the GRANITE and DIAMOND models. The maximum speed and the range
should still be similar to that stated in the table above.
Use these lower power levels when ne-
gotiating busy cycle paths and crowded
areas. Also use when setting off and
gradually increase through the levels for
a smoother performance.
Ideal for negotiating obstacles.