Specifications

26
Pro
Battery Fuse
If the battery will not operate or charge correctly, firstly switch off
the battery and check the battery fuse (rated 35A) located on the
underside of the battery beneath the screw cover. Use a small
cross-head (+) screwdriver to remove the cover.
Battery Fuse
35A Blade Type
(Automotive)
Purple
Battery USB Socket
On the end of the battery, opposite to the switch and charging
socket, is located a standard USB socket. This can be used as a
power supply for small USB powered devices such as mobile
phones and cameras. It is primarily intended as an emergency
power supply should your devices on-board battery run low. It is
not designed for long term usage as a power supply.
To use the socket, the battery must be removed from the bike.
Switch off the battery before unlocking and removing. Plug in the
USB lead then turn on the main battery power switch. Ensure that
the power is switched off before unplugging the USB lead.
Note: This is an output source and should
not be connected to a USB charger.
SPECIAL BATTERY FEATURES