SDS
Tub Refinishing Inc., DBA Munro Products Page 2 of 3
5. Firefighting
5.1 Flash Point
None
5.2 Extinguishing Media
Not combustible. Use extinguishing method suitable for surrounding fire.
5.3 Special Fire Fighting Procedures
None
5.4 Fire and Explosion Hazards
Heating may release toxic corrosive gases.
6. Accidental Release
Contain spilled product. Collect using appropriate housekeeping methods. Dispose in accordance with local
environmental rules and regulations.
7. Handling & Storage
7.1 Storage
Keep out of reach of children. Store provided container.
7.2 Handling
Use appropriate personal protection equipment. Avoid contact with skin
and eyes. Wash with alkaline soap after use.
8. Exposure Controls & Personal Protection
8.1 Respiratory
Use in well ventilated area
8.2 Eye Protection
Plastic splash goggles.
8.3 Skin
Neoprene, nitrile or rubber gloves. Body protection as necessary to prevent
skin contact.
8.4 Work Practices
Good personal hygiene must be practiced. Keep away from food and feed
products
8.5 Control Parameters
Ingrediant
Exposure limitations
Ammonium bifluoride
2.5 mg/m3 TWA OSHA PEL
2.5 mg/m3 ACGIH TLV
Ethanedioic acid dihydrate
1 mg/m3 TWA, 2 mg/m3 STEL ACGIH TLV
1 mg/m3 TWA OSHA PEL
9. Physical & Chemical Properties
Appearance
White crystalline powder
Odor
Mild
Odor Threshold
No data available
pH
2.45
Specific Gravity
1.02
Melting point / freezing point
N/A
Initial boiling point and boiling range
N/A
Flash Point
Non-flammible
Flammability (solid, gas)
Non-flammible
Upper/lower flammability or explosive
limits
Non-flammible
Solubility
Completely soluble
VOC %
0
10. Stability & Reactivity
10.1 Chemical Stability
Stable
10.2 Possibility of hazardous Reactions
N/A
10.3 Conditions to Avoid
N/A