SDS

ManualsBrandsBATHWORKS ManualsBathtub & Tile Paint3 oz. DIY Bathtub and Tile Chip Repair Kit (10-Pack)

Safety Data Sheet

1. Identification

1.1 Product Name

BATHWORKS

DIY Refinishing Kit – Part B Base Hardener

1.2 Distributor

Munro Products

9150 Clarence Center Road

Clarence Center, NY 14032

(716) 741-9450

www.bath-works.net

1.3 Emergency Information

CHEMTREC®

(800) 424-9300

Poison Control Center

(800) 854-6813

2. Hazard Identification

2.1. Classification of the substance or mixture

Flam. Liq. 3;

H226 Flammable liquid and vapor.

Skin Sens. 1;

H317 May cause an allergic skin reaction.

Resp. Sens. 1;

H334 May cause allergy or asthma symptoms of breathing difficulties if inhaled.

Aquatic Chronic 3;

H412 Harmful to aquatic life with long lasting effects.

2.2. Label elements

Using the Toxicity Data listed in section 11 & 12 the product is labelled as follows.

Danger

H226 Flammable liquid and vapor.

H317 May cause an allergic skin reaction.

H334 May cause allergy or asthma symptoms of breathing difficulties if inhaled.

H412 Harmful to aquatic life with long lasting effects.

P210 Keep away from heat / sparks / open flames / hot surfaces - No smoking.

P260 Do not breathe mist / vapors / spray.

P261 Avoid breathing dust / fume / gas / mist / vapors / spray.

P262 Do not get in eyes, on skin, or on clothing.

P272 Contaminated work clothing should not be allowed out of the workplace.

P273 Avoid release to the environment.

P280 Wear protective gloves / eye protection / face protection.

P285 In case of inadequate ventilation wear respiratory protection.

P301+310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P302+352 IF ON SKIN: Wash with soap and water.

P303+361+353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with

water/shower.

P304+341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position

comfortable for breathing.

P331 Do NOT induce vomiting.

P333+313 If skin irritation or a rash occurs: Get medical advice/attention.

P342+311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor / physician.

P363 Wash contaminated clothing before reuse.

P370 In case of fire:.

Summary of content (16 pages)

PAGE 1
Safety Data Sheet 1. Identification BATHWORKS® DIY Refinishing Kit – Part B Base Hardener Munro Products (716) 741-9450 9150 Clarence Center Road Clarence Center, NY 14032 www.bath-works.net 1.1 Product Name 1.2 Distributor 1.3 Emergency Information 2.1. CHEMTREC® Poison Control Center (800) 424-9300 (800) 854-6813 2. Hazard Identification Classification of the substance or mixture Flam. Liq. 3; H226 Flammable liquid and vapor. Skin Sens. 1; H317 May cause an allergic skin reaction. Resp. Sens.
PAGE 2
P403+233 Store in a well ventilated place. Keep container tightly closed. 2.3 HMIS Rating Health: 3 Flammability: 3 Reactivity: 0 3. Ingredient Composition This product contains the following substances that present a hazard within the meaning of the relevant State and Federal Hazardous Substances regulations.
PAGE 3
5.1. Extinguishing media 5.2. Special hazards arising from the substance or mixture 5.3. Advice for firefighters 5.4. ERG Number 5. Firefighting CAUTION: This product has a very low flashpoint. Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective. SMALL FIRES: Use dry chemical, CO2, water spray or regular foam. LARGE FIRES: Use water spray, fog, or regular foam. Do not use straight streams.
PAGE 4
0000123-86-4 BUTYL ACETATE OSHA ACGIH NIOSH Supplier OHSA, CAN Mexico 0000822-06-0 Hexamethylene diisocyanate Brazil OSHA ACGIH NIOSH Supplier OHSA, CAN 0028182-81-2 Hexamethylene diisocyanate homopolymer 0064742-95-6 Petroleum naphtha Mexico Brazil OSHA ACGIH NIOSH Supplier OHSA, CAN Mexico Brazil OSHA ACGIH NIOSH Supplier OHSA, CAN Mexico Brazil 150 ppm TWA; 710 mg/m3 TWA 200 ppm STEL; 950 mg/m3 STEL 150 ppm TWA 200 ppm STEL 150 ppm TWA; 710 mg/m3 TWA 200 ppm STEL; 950 mg/m3 STEL 1700 ppm ID
PAGE 5
0064742-95-6 Petroleum naphtha NIOSH Ingredient BUTYL ACETATE Source OSHA NTP IARC No Established Limit Carcinogen Data CAS No. 0000123-86-4 0000822-06-0 0028182-81-2 0064742-95-6 Hexamethylene diisocyanate OSHA NTP IARC Hexamethylene diisocyanate homopolymer OSHA NTP IARC Petroleum naphtha OSHA NTP IARC 8.2.
PAGE 6
soiled clothing and wash clothing thoroughly before reuse. Shower after work using plenty of soap and water. Appearance 9.
PAGE 7
harmful or fatal. Ingredient Hexamethylene diisocyanate homopolymer - (28182-81-2) BUTYL ACETATE - (123-86-4) Petroleum naphtha - (64742-95-6) Hexamethylene diisocyanate (822-06-0) Oral LD50, mg/kg 5,000.00, Rat - Category: 5 10,700.00, Rat - Category: NA 6,800.00, Rat -Category: NA No data available Skin LD50, mg/kg No data available 17,600.00, Rabbit - Category: NA 3,400.
PAGE 8
13.1 Waste treatment methods Do not allow spills to enter drains or watercourses. Dispose of in accordance with local, state and federal regulations. (Also reference RCRA information in Section 15 if listed). 14. Transportation Information 14.1 UN number 14.2 UN proper shipping name 14.3 Transport hazard class(es) Proper Shipping Name UN Number Hazard Class Packaging Group UN 1263 PAINT DOT (Domestic Surface Transportation) PAINT UN 1263 3 III CERCLA/DOT RQ: 5359 gal. / 50000 lbs. 14.
PAGE 9
Proposition 65 - Female Repro Toxins (>0%): Proposition 65 - Male Repro Toxins (>0%): (No Product Ingredients Listed) Proposition 65 - Developmental Toxins (>0%): (No Product Ingredients Listed) SDS Revision Date: (No Product Ingredients Listed) 16. Other Information 3/11/2014 The information and recommendations contained herein are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information contained herein.
PAGE 10
Safety Data Sheet 1. Identification BATHWORKS® DIY White High Speed Filler BATHWORKS® Chip Filler Munro Products (716) 741-9450 9150 Clarence Center Road Clarence Center, NY 14032 www.bath-works.net 1.1 Product Name 1.2 Distributor 1.3 Emergency Information CHEMTREC® Poison Control Center 2. 2.1 Classification of the substance or mixture: (800) 424-9300 (800) 854-6813 Hazard Identification Flammable Liquids 3 Skin Corrosion/Irritation 2 Eye Damage/Irritation 2B Acute Toxicity-Inhalation 4 2.
PAGE 11
3. 3.1 Mixtures Chemical Identity Polyester Resin Unsaturated Polyester Resin Styrene Monomer Sodium Borosilicate Glass Magnesium Silicate Barium Sulfate Titanium Dioxide m-Tolyl Diethanolamine Methyl Alcohol Ingredient Composition CAS No. 28472-89-1 Proprietary 100-42-5 65997-17-3 14807-96-6 7727-43-7 13463-67-7 91-99-6 67-56-1 Concentration 20% 3% 10% 5% 40% 10% 10% 1% 1% 4. First Aid 4.
PAGE 12
5.3 Flash Point: 5.4 Special protective actions for fire-fighters: violent rupture of the container. Combustion may produce carbon monoxide, carbon dioxide and irritating or toxic vapors and gases. 89° F (32 ° C). Wear self-contained breathing apparatus (SCBA) and full fire-fighting protective clothing. Thoroughly decontaminate all protective equipment after use. Evacuate all persons from the fire area to an explosion-protected location.
PAGE 13
8. 8.1 Control parameters Component CAS No. Exposure Controls & Personal Protection EINECS Exposure Limits Source 100 ppm PEL OSHA Styrene 100-42-5 202-851-5 10% - 12% 20ppm TWA ACGIH 40 ppm STEL ACGIH 8.2 Appropriate engineering Local ventilation may be required during certain operations to maintain controls: concentrations below recommended exposure limits. Use explosion-proof ventilation equipment. 8.
PAGE 14
9.16 Auto-ignition temperature: 9.17 Decomposition temperature: 9.18 Viscosity: 9.19 Volatile Organic Compounds: 10.1 Reactivity: 10.2 Chemical stability: 10.3 Possibility of hazardous reactions: 10.4 Conditions to avoid: N/A 10.5 Incompatible materials: 10.6 Hazardous decomposition products: 914° F (490° C) N/A N/A 12% by mass (186 g/liter) 10. Stability & Reactivity N/A Stable at normal temperatures and storage conditions.
PAGE 15
assay. 11.4 Numerical measures of toxicity: Ingredient Name CAS No. m-Tolyldiethanolamine 91-99-6 % 0.5% - 1% Styrene 100-42-5 10% - 12% Test LD50 LD50 LD50 LD50 Result Route Species 0.8 – 3.1 g/kg 24 g/m3, 4 hrs. 5g/kg 5g/kg Oral Inhalation Oral Dermal Rat Rat Rat Rabbit 12. Ecological Information 12.1 Ecotoxicity: Chemical Name CAS No. % Test Concentration Result Species Styrene 100-42-5 10% - 12% LC50 23 mg/L 48 hrs.
PAGE 16
CERCLA: SARA Title III: Section 311/312 - Hazard Communication Standard (HCS): SARA Title III: Section 313 Toxic Chemical List (TCL): TSCA Section 8(b) - Inventory Status: TSCA Section 12(b) - Export Notification: This material is classified as an IMMEDIATE HEALTH HAZARD, DELAYED HEALTH HAZARD, FLAMMABILITY HAZARD, and REACTIVITY HAZARD under the US Superfund Amendment and Reauthorization Act (Section 311/312).