Instructions

There are 3 different ways to install acoustic wall
panel:
1. Gluing straight onto the wall (glue not included).
A construction glue or grab adhesive is recommend
for this.
2. Screwing the panels directly into the wall through
the acoustic felt (screws not included). A minimum of 8
screws per panel should be used, but we recommend
12 pcs. Please make sure the correct fixings are used if
going into plasterboard for example.
3. Screwing the panels into 45mm timber battens. To
achieve optimum sound absorption we recommend
screwing 45mm timber battens to the wall and then
screwing the panels directly into the battens through
the acoustic felt. When combined with rockwool behind
the panels in between the battens this will achieve
Class A sound absorption.
ROCKWOOL