Operating instructions

13
• For working with max. speed, turn the
regulator in direction to MAX. This setting
corresponds to a speed of 10,000
revolutions per minute.
ADJUSTING THE SANDING HEAD
For turning the sanding head into the upright
position resp. for tilting the sanding head
down, use the releasing button (1).
1. Press down the releasing button (1) and
hold it pressed.
2. If the sanding head is in the upright
position, tilt the head down
3. If the sanding head is angled, press
down the releasing button (1) and keep it
pressed. Lift up the sanding head to
engage it in the upright position.
MAINTENANCE AND CLEANING
• It is very important to keep the ventilation
openings (8) clean and free from obstructions
at all times. Clean out the slots after each use
with a stiff brush or compressed air.
• Do not use water or any other liquid to
clean the sander.
TECHNICAL DATA
Voltage: 230 V~
Frequency: 50 Hz
Power Consumption: 300 W
Triangular Sanding Plate : 90 x 90 x 90 mm
Speed: 6000 - 10000 min
-1
Power Cable: 3 m
Weight: 1.3 kg
Protection Class: II
Accessories:
1 Pc Dust Collection Hose
1 Pair Carbon Brush
Sanding paper
DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to
dispose of this article, then please keep in
mind that many of its components consist of
valuable materials, which can be recycled.
Please do not discharge it in the rubbish bin,
but check with your local council for
recycling facilities in your area.
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
EN
7061488 Ma # 1208-14.indd 13 14-08-12 08:44