Operating instructions

11
EN
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tools operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended could
result in a hazardous situation.
5. Service
a) Please use a qualied expert who
uses original replacement parts to repair
your power tool. This will ensure proper
functioning of the power tool.
SAFETY NOTES
To avoid malfunction, damage,
and physical injury please follow
the General Safety Notes and the
following safety notes:
• Make sure the voltage corresponds to the
type label on the machine.
• Persons with limited physical, sensorial
or mental abilities are not allowed to use
the machine, unless they are supervised
and briefed for their safety by a qualied
person.
• Secure the workpieces to avoid slipping.
• Always lay down the sander before the
moving parts have come to complete
stop.
• Always attach the dust collection hose to
the dust extraction ange while working
with the sander.
• Attention: The sander is not designed for
wet sanding.
• Do not immerse the machine in liquids.
• Make sure the sanding pad is correctly in
place before switching on.
• Avoid moving parts while working. There
is danger of injury!
• Never sand materials containing
asbestos.
• Please note that poisonous dust may be
formed e. g. when sanding paint, which
contains lead, while processing
some kinds of wood or metal. The
dust forming during operation may
be hazardous to your health,
combustible or explosive. Wear
safety goggles, dust protection and
ear protection.
• In the case of a malfunction please
do not attempt to repair the machine
yourself. Send the machine to the
Batavia customer support department or
have it repaired by a professional.
BEFORE FIRST USE
Remove the delta sander and all
accessories out of the packaging and check
all parts for damage in transit. Keep
packaging materials out of reach of children.
There is risk of suffocation!
INTENDED USE
The sander may only be used for dry
sanding work and polishing. The machine is
suitable for working on wood, metal, plaster,
plastic and ller surfaces. The sander can
also be used for removing rust, old paint
and intermediate sanding.
7061488 Ma # 1208-14.indd 11 14-08-12 08:44