User manual

3. Operating Instructions
3.1. Manual Operation
3.1.1. Power Switch
The ON/OFF button (see illustration) controls the caddy’s main power supply. Once you
have connected the battery, make sure that the rheostat speed control is in OFF position. Now press
the button for ca. 2 seconds in order to switch the caddy ON or OFF (similar to a mobile phone
operation). Now the battery charge indicator LEDs will illuminate, and your caddy is ready for
operation.
3.1.2. Battery Charge Indicator LEDs
After the caddy has been switched on all LED lights (green, yellow, red) should be
illuminated. This indicates that the battery is fully charged. During play as the battery is being
discharged first the green light should go off, then the yellow, and when only the red LED is
illuminated it is time to recharge the battery.
(High power) : Green Color
(Mid power): Yellow Color.
(Low power): Red Color
3.1.3. Timed Advance Distance Function
: When your press 10M, the trolley will run 10 Meters/Yards and stop by itself .
Page 6 of 20