User manual

2. Assembly Instructions
1. Unpack all items carefully and check parts inventory.
2. Place frame structure (one piece) on soft and clean ground to protect frame from
being scratched. Attach wheels to axles by pushing wheel locking button on the
outside of the wheel and inserting the axle extension into the wheel. Make sure
to keep the locking button on the outside of the wheel pushed in during this
process, in order to enable the axle extensions, including the two pins, to be
inserted all the way into the wheel. If not locked in, the wheel will not be
connected to the axle and will not be propelled!!! Test the lock by trying to pull
the wheel out. To disassemble the wheels proceed in reverse order.
3.
Erect Frame by unfolding and connecting the main frame tube together at the
frame lock hinge and locking the Y-shape lower support structure to the main
frame with the frame lock mechanism. Proceed in reverse for folding the caddy.
4. Place battery pack on battery tray and fasten Velcro strap around battery tightly.
Insert battery plug into caddy outlet. Note: BEFORE CONNECTING make
sure that Rheostat Speed Control on handle is in OFF position and the
remote control is stored securely!!!
Page 4 of 20