User manual

2. Assembly Instructions
1. Unpack all items carefully and check inventory.
2. FOLD STEP:
3. Attach wheels to axles by pushing wheel locking button on the outside of
the wheel and inserting the axle extension into the wheel. Make sure to
keep the locking button on the outside of the wheel pushed in during
this process, in order to enable the axle extensions, including the two
pins, to be inserted all the way into the wheel. If not locked in, the wheel
will not be connected to the clutch and will not be propelled!!! Test the
lock by trying to pull the wheel out. To disassemble the wheels proceed in
reverse order.
Attention: Make sure that the right wheel (marked) is attached to the
right side and the left wheel (marked) to the left side (seen from
behind in driving direction), as the wheels have built in clutches. The