User manual

- Remote Control Range: We recommend not to exceed 50 yards distance. The greater the distance
between you and caddy, the greater the chance of losing contact with it (only applicable for remote
controlled models)
- Microcomputer: The remote caddy has 3 microcomputer controls: The first is in main controller
box. The second is in the remote control transmitter handset, and the third is in the receiver in the
handle. Non remote caddies have 2 controls (controller box and handle control)
- Safety Protection: When the temperature of the controller box reaches its upper limit in case of an
overload it will automatically shut down to cool off.
- Microprocessor Controlled Electronics System: When you connect the battery, the electronics
system will automatically run through a start-up routine. Then you can press the main OFF/ON
button on the handle. The power indicator lights will go on, and the caddy is ready for use.
-
- Important: The electronics controller box contains no user serviceable parts. Therefore, it is sealed
to reduce the risk of moisture entering and impacting the electronic system. Breaking this seal
increases the risk of damaging the electronics and decreasing the reliability of your caddy. DO NOT
attempt to open the controller case. Doing so will void the warranty!
- Battery Operation and Care: Follow battery charge and maintenance instructions. The battery
comes with leads and connector.