User manual

9
6. Unpack remote control and install batteries with plus and minus poles as indicated
in the diagram in the receiver compartment of the unit. Now you are ready to learn
and understand the functions of the manual and remote controls.
OPERATING INSTRUCTIONS
1. X3 & X3R
T-Handle Control Functions
The ON/OFF button controls the caddy’s main power supply. Once you have
connected the battery, make sure that the rheostat speed control is in OFF position (all the way
counterclockwise). Now press the button for 2-5 seconds in order to switch the caddy ON or
OFF (similar to a mobile phone operation). Now the battery charge indicator LEDs will
illuminate, and your caddy is ready for operation.
Battery Charge Indicator LEDs; after the caddy has been switched on, all LED lights
(green, yellow, red) should be illuminated simultaneously. This indicates that the battery
is fully charged. During play, as the battery is being discharged, first the green light
should go off, then the yellow, and, when only the red LED is illuminated, it is time to
recharge the battery.
High Power: Green Color
Medium Power: Yellow Color.
Low Power: Red Color
Timed Advance Distance Function:
When your press 10M, the trolley will run 10 Meters/Yards and stop by itself.