User Manual

M8x25mmScrews

4 Units

Executive Chair with Integrated Headrest

Model: BSX110VA19T

HONBASYX.COM

M8x20mmScrews

4 Units

center of the Base(B).

Tighten with Allen Wrench(J).

Step 3 :

Attach Mechanism (F) to Chair Seat(D) using four M8 x 25mm Screws(H) as shown.

Tighten with Allen Wrench(J).

Attach Chair Back (E) to Chair Seat(D) using four M8 x 25mm Screws(H) as shown.

Assemble the armrest (G) to Chair Seat(D) using four M6 x 40mm Screws(I) as shown.

Tighten with Allen Wrench(J).

Step 2:

Insert Casters (A) into Chair Base(B).Insert Gas Lift(C) into the hole in the Step 1:

Step 4 :

the Chair Seat(D) to secure in place.

Carefully place the assembled Chair Frame onto the Gas Lift(C). Aligning the hole in the

Seat Mechanism on the Chair Seat(D) with the Gas Lift(C). Press down on

Step 5 :

PAGE 1
Model: BSX110VA19T Executive Chair with Integrated Headrest Step 1: Insert Casters (A) into Chair Base(B).Insert Gas Lift(C) into the hole in the center of the Base(B). Step 2: Assemble the armrest (G) to Chair Seat(D) using four M6 x 40mm Screws(I) as shown. Tighten with Allen Wrench(J). Step 3 : Attach Mechanism (F) to Chair Seat(D) using four M8 x 25mm Screws(H) as shown. Tighten with Allen Wrench(J). Step 4 : Attach Chair Back (E) to Chair Seat(D) using four M8 x 25mm Screws(H) as shown.