Installation Manual

ParSec
Reader
Installation Manual - Issue:3 - December 1998 - Page 19
8. Repair
If for any reason you wish to return the reader for repair or upgrade, before shipping the
reader call the Operations Department at Newmark on [phone] and obtain a
Repair and Service number (RAS No.). When calling, please have the following information
available:
• Reason for return
• Reader serial number
• Our invoice or sales order number - if known
Mark the package with the RAS number and return it to the address on the front page of this
manual.
For readers which are no longer covered by our 12 month warranty, you will need to send us a
new purchase order.
The information in this document is subject to change without notice and should not be
construed as a commitment by Newmark Technology Limited. No responsibility is assumed
by Newmark Technology Limited for any errors that appear in this document.
No part of this document may be transmitted or reproduced in any form or by any means,
electronic or mechanical, including photocopy, recording or any information storage or
retrieval system without the express permission in writing from Newmark Technology
Limited.
9. Change Record
Change Date Description of Change Affected Sections
ERN 11145 Sept 1997 First release
ECN 11154 Jan 1998 CaT replaced by RAT 4
ECN 11175 Dec 1998 New PCB switch/links 4 – new section 5
ECN 11176 March 1999 FCC statement added, Page 1
PET battery fitting new section 7