User Manual
ParSec Reader Installation Manual - Issue:2 - January 1998 - Page 11
4.1.
Default Switch Settings
Table 2 below lists the functions of all switches on the Logic Pcb. When installing a reader for
the first time, set the switches to their default conditions shown in italics in the table.
S
WITCH
P
OLE
S
ENSE
F
UNCTION
S1 Depressed Front panel tamper OFF (ON when cover removed)
S2 0-9
(
0
)
Reader
Number - Units (User set) for PSR-232-1 type only
S3 0-9
(
0
)
Reader
Number - Tens (User set) for PSR-232-1 type only
S4 1
ON
Enable external sounder input (+5 to +12VDC)
2
ON
Enable tamper sounder (set to OFF until unit is installed and
front panel fitted)
3
ON
Enable static asset tag detect peep
4
ON
Enable portable asset tag detect peep
S5 Not used - leave all 4 sections off
S6 Press Scanner master reset (starts scanner - indicated by flashing
power LED)
S9 1-7
(
3
)
Static asset tag pulse count setting 1=1, 7=7 (8,9 & 0 unused -
default to 1); also determines number of Static tag pulse
counts before Wiegand data output (RS-232 not affected)
S10 Depressed Front panel tamper OFF (ON when cover removed)
S11 1
ON
Disable PIR usage
2
OFF
No external PIR set
3
OFF
Disable internal PIR
4
OFF
Enable internal LED control
(ON disables internal and enables external LED control; logic
= active low input).
S12 0-9
(
4
)
Static asset tag alarm time setting (controls relay contacts and
internal alarm sounder)
0=2s, 1=5s, 2=10s, 3=30s, 4=1m, 5=2m, 6=5m, 7=10m,
8=15m, 9=20m
S13 1
OFF
Internal sounder volume low (ON = high volume)
2
OFF
RS-232 data 9,600 baud (ON = 2,400 baud)
3 & 4
OFF
Position dependent on sub-system code; both must match
Static asset tag switch positions;
S14 1
ON
Enable Portable asset tag alarm relay
2
ON
Enable Static asset tag alarm relay
3
ON
Enable Portable & Static asset tag tamper internal alarm relay
4
-
Not used
S15 Press Master processor and KeyPIC reset; only used in total
data/reader lock-up condition which may be caused by bad
power or other data error
T
ABLE
2 - L
OGIC
P
CB
S
WITCH
F
UNCTIONS