Installation Manual

21
Revision 0.8
3.2.1.5 Mounting On (Below) Ceiling
The Sensor can be mounted below ceiling tiles using a Sensor Tripod Mount and two M5x10mm
pan head screws (see Figure 13), a HX-T-CLIP-BA1 ceiling tile T-Bar clip from Grip Lock Systems
(see Figure 14), and a ¼-20 locking nut (not shown). The HX-T-CLIP-BA1 provides a wire loop on
the top for additional support if needed.
Procedure:
1. Install HX-T-CLIP-BA1 to ceiling tile grid rail. See video link below – do not install
‘stopper’: https://www.youtube.com/watch?v=NezPDVeJUCg&feature=youtu.be
2. Attach Sensor Tripod Mount to the T-Bar clip (see Figure 15). Secure Tripod Mount to the
T-Bar clip with a ¼-20 locking nut (not shown).
3. Attach Sensor to Tripod Mount using two M5x10mm pan head screws (see Figure 16).
Figure 13. Sensor Tripod Mount Kit