User`s manual

Physical Interface AW00104701000
60 Basler scout light GigE
Fig. 19: Standard Power and I/O Cable
NOTICE
Avoid Applying Voltage to the Non-functional Pins.
Applying voltages to the non-functional pins in the 12-pin connector may damage the electronic
components in the camera. We recommend that you do not apply signals to any of the non-
functional pins.
NOTICE
An Incorrect Plug Can Damage the 12-pin Connector.
The plug on the cable that you attach to the camera’s 12-pin connector must have 12 pins. Use
of a smaller plug, such as one with 10 pins or 8 pins, can damage the pins in the camera’s 12-pin
connector.
DC
Power
Supply
Hirose
HR10A-10P-12S
12-pin Plug
Standard Power
and I/O Cable
1
2
3
4
5
6
7
8
9
10
11
12
AC In
I/O In 1
Non-functional
I/O In Gnd
I/O Out 1
Non-functional
I/O Out VCC
Non-functional
Non-functional
In Pwr Gnd
In Pwr Gnd
In Pwr VCC
In Pwr VCC
Shield