User`s manual

AW00104701000 Physical Interface
Basler scout light GigE 57
Pin numbering for the 12-pin receptacle is as shown in Section 7.2.3 on page 57.
7.2.2 RJ-45 Jack Pin Assignments
The 8-pin RJ-45 jack provides Ethernet access to the camera. Pin assignments adhere to the
Ethernet standard.
7.2.3 Pin Numbering
Fig. 18: Pin Numbering for the 12-pin Receptacle
* Pins 1 and 2 are tied together inside of the camera.
** Pins 8 and 9 are tied together inside of the camera.
To avoid a voltage drop when there are long wires between your power suppy and
the camera, we recommend that you provide camera power VCC through
separate wires between your power supply and pins 8 and 9 on the camera. We
also recommend that you provide camera power ground through separate wires
between your power supply and pins 1 and 2 on the camera.
1
12
2
3
4
5
6
7
8
9
10
11