User`s manual

Physical Interface AW00104701000
56 Basler scout light GigE
7.2 Connector Pin Assignments
and Numbering
7.2.1 12-pin Receptacle Pin Assignments
The 12 pin receptacle is used to access the physical input line and the physical output line on the
camera. It is also used to supply power to the camera. The pin assignments for the receptacle are
shown in Table 4.
Pin Designation
1 Camera Power Gnd *
2 Camera Power Gnd *
3 I/O Input 1
4 Non-functional
5 I/O Input Gnd
6 I/O Output 1
7 Non-functional
8 Camera Power VCC **
9 Camera Power VCC **
10 I/O Output VCC
11 Non-functional
12 Non-functional
Table 4: Pin Assignments for the 12-pin Receptacle
NOTICE
Avoid Applying Voltage to the Non-functional Pins.
Applying voltages to the non-functional pins in the 12-pin connector may damage the electronic
components in the camera. We recommend that you do not apply signals to any of the non-
functional pins.