User`s manual

Specifications, Requirements, and Precautions
Basler pioneer 13
1.5.2 Sensor Positioning Accuracy
The sensor positioning accuracy is as shown in the drawings below.
Fig. 12: Sensor Positioning Accuracy (in mm Unless Otherwise Noted)
= reference plane
To the length
of the housing
± 0.25
X
± 0.4
Center lines
of the sensor
Center lines
of the thread
17.526
+ 0
0.05
-
Photosensitive
surface of the
sensor
± 0.02
(This is the sensor tilt tolerance. It applies to every point on the
photosensitive surface and is relative to the center of the die.)
( 2 : 1 )
(This tolerance is for the distance between the front of the
lens mount and the sensor’s photosensitive surface. Every
point on the photosensitive surface will be within this tolerance.)
Maximum Sensor Tilt Angle (Degrees)
Camera Tilt X Tilt Y Camera Tilt X Tilt Y
piA640-210gm/gc 0.48 0.63 piA1900-32gm/gc 0.16 0.29
piA1000-48gm/gc 0.31 0.31 piA2400-12gm/gc 0.27 0.32
piA1600-35gm/gc 0.19 0.26