User`s manual

Configuring the Camera
4-4 Basler L304kc
Draft
4.1.4 Configuration Tool Help
The CCT+ includes a complete on-line help file that explains how to change parameter settings.
It also explains how to copy the work set to a saved user set file and how to copy a saved user
set file or the factory set file to the work set. To access on-line help, press the F1 key whenever
the configuration tool is active.
L
Keep in mind that the work set is stored in the camera’s volatile memory. Any
changes you make to the work set using the configuration tool will be lost when the
camera is switched off. To save changes you make to the work set, save the modified
work set to one of the camera’s four user set files. The user set files are stored in
non-volatile memory and will not be lost when the camera is switched off (see Sec-
tion 3.17).