User`s manual

Physical Interface AW00089316000
50 Basler ace GigE
5.2 Camera Connector Pin Assignments
and Numbering
5.2.1 6-pin Connector Pin Assignments and
Numbering
The 6-pin connector is used to access the physical input line and physical output line on the camera.
It is also used to supply power to the camera (if PoE is not used).
The pin assignments for the connector are shown in Table 8.
The pin numbering for the 6-pin connector is as shown in Figure 32.
Pin Designation
1 +12 VDC Camera Power
2 I/O Input 1
3 Not Connected
4 I/O Out 1
5 I/O Ground
6 DC Camera Power Ground
Table 8: Pin Assignments for the 6-pin Connector
4
5
6
2
3
1
Fig. 32: Pin Numbering for the 6-pin Connector