User`s manual

AW00089316000 Revision History
Basler ace GigE 367
AW00089316000 8 Aug 2012 Section 10
 Updated the minimum gain setting for the acA2000 and acA2040
models in Table 19 on page 212 and Table 20 on page 213.
 Inserted information in Section 10.6 on page 228 that the stacked zone
imaging feature on the acA2000-50 and acA2040-25 increases the
camera’s frame rate.
 In the sequencer feature Section 10.7:
 Entered sequencer parameters that are stored in the factory set.
 Added that overlapped operation is not possible for the acA2500-14
with the sequencer feature enabled.
 Added the vertical decimation feature in Section 10.9 on page 272.
 Added Section 10.12.3.1 on page 285 describing the assignment of an
auto function to an auto function AOI.
 Added the gray value adjustment damping feature in Section 10.12.6 on
page 295.
Doc. ID Number Date Changes